Drip Irrigation Supplies
Delay Option Filtering
Filter Products
Impact resistant plastic for long-term service.
shut-off cap for WPS drippers
1/2" MIPT x 16mm barb adapter
To be used with all dripper assemblies
"clips" onto the dripper tubing for stabilization.
A fast and easy means for closing off the end of your 20mm irrigation line. Can be quickly opened for draining.
3/4" MIPT x 16mm compression adapter
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
Arkal Discs are flat, grooved plastic rings with a hole in the center. Rings are stacked together to form a cylindrical filter element. The grooves in the rings criss-cross, forming a network that traps both organic and inorganic contaminants, and allows filtered water to pass through. For easy cleaning remove the cover exposing the discs. They automatically separate allowing access to the accumulation of dirt particles. Wash off the discs with a stream of water, reassemble and the cleaning process is complete. A filter should be used with all Netafim watering systems.
STAINLESS STEEL FILTER ELEMENT
Netafim Polyethylene Tubing is made from quality low density polyethylene resins. With Netafim's stringent quality controls, every coil undergoes a battery of tests and over 30 quality checks before leaving the factory. This means you'll receive the highest quality product with each and every coil. Whether you choose white or black Netafim polyethylene tubing, you'll be getting the same performance features you've come to rely on and trust.
UV WhiteT Polyethylene (PE) Tubing
With excellent Ultra-Violet (UV) resistance, our reflective white tubing is completely opaque to prevent algae growth. It withstands heat, direct sun and harsh chemicals while producing cooler water temperatures enhancing plant growth. This white PE tubing compliments our complete line of distinctive white components and tubing.
use with Woodpecker and CNL emitters
Streamline Plus Thinwall Dripline is the perfect choice for row crop growers planting short to medium sized runs. Available with variable dripper spacings, allowing growers to customize systems based on their application rates and wetting patterns and numerous wall thicknesses that can weather various environmental conditions. For surface or subsurface installations in practically any soil type.
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
To be used with all dripper assemblies
Streamline Plus Thinwall Dripline is the perfect choice for row crop growers planting short to medium sized runs. Available with variable dripper spacings, allowing growers to customize systems based on their application rates and wetting patterns and numerous wall thicknesses that can weather various environmental conditions. For surface or subsurface installations in practically any soil type.
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
Adapter to fit spinner/spreader mini-sprinklers to hanging assemblies, or LPD's
adapter to fit micronet sprinkler to Dan base.
This very versatile system uses the pressure compensating dripper and 4-way manifolds with the arrow dripper stakes. The 4-way manifolds can be stacked to allow for the watering of 4 or 8 pots from one emitter. The system enables the grower to water 8 smaller pots by stacking two 4-way manifolds together and then changing over to 4 larger pots by removing one of the 4-way manifolds. The system also allows the grower to vary the tube lengths from crop to crop. Assembly includes a 4-WAY manifold, Flex PVC Hose at desired lengths, and 4 arrow drippers. Please remember to order a 2 GPH Pressure Compensating Dripper with each 4-way assembly. Pot flow rate will vary depending on # of pots being watered from each emitter. A 35 psi regulator required for proper operation.
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
Delivers precise amounts of water to individual pots. The WPCJ pressure compensated no-leak dripper is ideal for longer runs, when irrigating on slope, or when absolute precision of water volume to each pot is required. The WPCJ's "no-leak" feature stops dripping when the pressure on the main water line drops. All of the drippers on the line start and stop at the same time, leaving the line full of water for the next irrigation. .5 GPH flow rate, a 20 PSI pressure regulator is required for proper operation. Choose either the red plastic weight or the angle barbed stake to complete the installation. Perfect for hanging baskets, nursery crops, potted plants.
The Multi-Outlet Dripper (M.O.D.) provides you with the flexibility to design your system your way. One M.O.D. does the job of eight drippers, and can be set up in a variety of configurations to meet your specific needs. Considerable cost savings are realized in the reduction of drippers, main pipes and accessories. Installation time is also greatly reduced, adding to your savings. The unique turbulent flow pattern and wide water passages provide a high degree of uniformity and prevent clogging. The M.O.D. exhibits all the reliabilty, precision and efficiency that has made Netafim the industry leader.
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 20 PSI should be used with non-pressure compensated drippers. Med flow 3.5-17 GPM
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 35 PSI should be used with pressure compensated drippers, or mini-sprinklers. Flow range 7-35 GPM
3/4" Female hose thread swivel x 16mm compression x 16 mm compression tee
This very versatile system uses the pressure compensating dripper and 4-way manifolds with the arrow dripper stakes. The 4-way manifolds can be stacked to allow for the watering of 4 or 8 pots from one emitter. The system enables the grower to water 8 smaller pots by stacking two 4-way manifolds together and then changing over to 4 larger pots by removing one of the 4-way manifolds. The system also allows the grower to vary the tube lengths from crop to crop. Assembly includes a 4-WAY manifold, Flex PVC Hose at desired lengths, and 4 arrow drippers. Please remember to order a 2 GPH Pressure Compensating Dripper with each 4-way assembly. Pot flow rate will vary depending on # of pots being watered from each emitter. A 35 psi regulator required for proper operation.
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
These are hiqh quality, economical emitters for use on short, level runs. With non-pressure compensating emitters, it is necessary to install a 20 PSI pressure regulator to reduce the pressure on the line. Nominal flow rate available: 0.5 GPH.