Dramm Corp

Water your plugs or seedlings with the softest full-flow watering nozzle available. The 1000PL "Red Head" Water Breaker has over 1000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Made in the USA from ABS plastic and stainless steel.

The 400PL Water Breaker provides fast, full-flow watering without damage to your plants. Patterned after the original 400 Aluminum Water Breaker with 3/4" hose threads, to 400PL is made from high-impact ABS plastic and aluminum to provide a lightweight alternative.

Standard hose thread. Add a water breaker and shutoff to complete assembly.

Standard hose thread. Add a water breaker and shutoff to complete assembly.

Simply the best shut-off valve available. Dramm's #300 Brass Shut-Off Valve provides fingertip water control at the end of your greenhouse hose. A quarter turn of the large ergonomic handle and the water is off. Full water flow design. Made in the USA from brass, durable seals and a hard chrome plated ball to provide years of service. 3/4 threads.

The 750 Lemonhead Water Breaker is designed to offer a lower, softer flow. Even softer than the 1000PL Red Head. The 750PL allows for more precise watering and give growers yet another choice for more flexibility in watering. Weight 1.6 oz. GPM = 7 @ 40 PSI

ColorStorm-Professional Rubber Hose is made from EPDM rubber for a "crackless" hose cover that is resistant to abrasion, weathering and kinking.

Standard hose thread- add a water breaker and shutoff to complete assembly.

The original full-flow shower head nozzle. The aluminum 400 Water Breaker provides fast, full-flow watering without damage to your plants. Used by professional growers worldwide. Cast aluminum with 3/4" brass hose threads. Manufactured in the USA since 1945. Weight 5.1 oz. GPM = 11.1 @ 40 PSI

Extra length- 48", Standard hose thread. Add a water breaker and shutoff to complete assembly.

The 74 Shut-off valve is made from glass filled polypropylene to be very durable and corrosion resistant. The 74 is lightweight and offers a full flow.

ColorStorm-Professional Rubber Hose is made from EPDM rubber for a "crackless" hose cover that is resistant to abrasion, weathering and kinking.

*Easily and accurately applies fertilizers and other liquids to gardens, container plants and greenhouse crops
*Attaches to standard hose fittings
*Prevents backflow if pressure should fail
*Plastic body for durability Minimum operating pressure 25 PSI (Do not use with more than 50' of hose)
*90 day warranty

Water your plugs or seedlings with the softest full-flow watering nozzle available. The 1000PL Red Head Water Breaker has over 1000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Made in the USA from ABS plastic and stainless steel. Weight 1.6 oz. GPM = 7 @ 40 PSI

Replenishment part for Custom Hose Starter Kit.

Water your plugs or seedlings with the softest full-flow watering nozzle available. The 1000PL Red Head Water Breaker has over 1000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Made in the USA from ABS plastic and stainless steel. Weight 1.6 oz. GPM = 7 @ 40 PSI

The 170AL Water Breaker is excellent for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets), and when using fertilizer syphons. Adjust water flow to 50% of its volume. Cast aluminum with 3/4" hose threads. Weight 1.6 oz. GPM = 7 @ 40 PSI

Replenishment part for custom hose starter kit.
ColorStorm-Professional Rubber Hose is made from EPDM rubber for a "crackless" hose cover that is resistant to abrasion, weathering and kinking.

ColorStorm-Professional Rubber Hose is made from EPDM rubber for a "crackless" hose cover that is resistant to abrasion, weathering and kinking.

Dramm / Microfan mechanical thermostats are designed with rough environments in mind. These high quality thermostats are perfect for any situation where harsh conditions may damage less durable equipment. Protected in durable PVC housing, these thermostats offer stainless steel coil sensors and accuracy to 1 C.
Features:
*Durable PVC housing
*Unlimited accuracy
*Non-corrosive construction
*Sealed wiring strain relief
*Single-stage or two-stage

The Seedling Nozzle allows you to water fragile plants, delicate seedlings or plant cuttings. This high-quality nozzle produces an extra fine hollow "cone mist pattern" and sprays a 1/2 gallon of water per minute. Made in the US from solid brass with 3/4" hose threads.

Replenishment part for Custom Hose Starter Kit.

Replenishment part for custom hose starter kit.

ColorStorm-Professional Rubber Hose is made from EPDM rubber for a "crackless" hose cover that is resistant to abrasion, weathering and kinging.

ColorStorm-Professional Rubber Hose is made from EPDM rubber for a "crackless" hose cover that is resistant to abrasion, weathering and kinking.

standard hose thread- add a water breaker and shutoff to complete assembly

The One Touch Valve offers thumb-tip control of your water flow. With 8 gpm output and a long life, the OneTouch Valve offers flexibility when watering.

Extra length, and curved to make watering overhead baskets a snap. Standard hose thread, add a water breaker and shutoff to complete assembly.

Dramm / Microfan mechanical thermostats are designed with rough environments in mind. These high quality thermostats are perfect for any situation where harsh conditions may damage less durable equipment. Protected in durable PVC housing, these thermostats offer stainless steel coil sensors and accuracy to 1 C.
Features:
*Durable PVC housing
*Unlimited accuracy
*Non-corrosive construction
*Sealed wiring strain relief
*Single-stage or two-stage

Use of the PulsFOG requires a carrier solution to help reduce surface tension and create evenly sized droplets. There are three solutions available. For most horticultural applications, NutriFOG is the preferred carrier. VK-I and VK-II are also available. NutriFog and VK-II are for all chemical formulations and mixed with water. VK-I is for EC chemicals only and is NOT to be mixed with water.

ColorStorm-Professional Rubber Hose is made from EPDM rubber for a "crackless" hose cover that is resistant to abrasion, weathering and kinking.

Treats up to 5,000 sq ft alone or up to 7,000 sq ft with HAF fans. Perfect for individual greenhouses, quonset huts and smaller areas. More than one can be used together for larger areas and separated for smaller areas.

Multi-purpose hydraulic sprayer. Applies most chemical formulations. Corrosion-resistant pump. 120 Volts 60 HZ.
Optional equipment:
*Optional hose reel (on model MS20-33)
*Optional cart, model MS-20E
*20 1/2" wide with 10" rubber wheels
*20 gallon solution tank
*Bottom draw conversion kit
*100' discharge hose MSO

Specs:
*Chemical Output Rate: Up to 0.5 gpm
*Maximum Pressure: Up to 500 psi
*Compressor HP: 1/4 hp electric
*Drive system: Direct drive
*Cord Length: 8 ft.
*Spray Distance: Stream: 20; mist 10'
*Shipping Weight: 28 lb.

*This item is drop-ship only.

The Brass Hose Swivel is a live swivel that allows for unencumbered movement between the hose and attachements under pressure. Reduces hose twisting.

L5 Extension Lance
For use with Dramm Portable CS-5AGS and MSO. The 5 small jets on the spray ring give a full, fine mist. Made of chrome plated steel with plastic hand grip. Shut-off. Brass and plated steel.

Make your own hose lengths easily and quickly with our Custom Hose Starter Kit. Dramm ColorStorm Professional Hose has become the durable and flexible choice of growers around the world. This kit makes it easy to get started cutting your own length of hose. The kit includes the Dramm Press, our easy to use hose crimper, with one set of jaws, two spools of 330' ColorStorm Hose and 12 male and 12 female fittings with ferrules - enough to make 12 hoses. It is available in either 5/8" or 3/4" kits.
Drop Ship plus freight.
3/4" Custom Hose Kit:
*3/4" Hose
*2 - 330' Spools 3/4" ColorStorm hose
*1 - DP Frame - Free of Charge
*1 - DP-J750 3/4" Jaws
*12 - 3/4" Male Fittings/Ferrules
*12 - 3/4" Female Fittings/Ferrules

For use with Dramm Portable CS-5AGS and MSO. The 5 small jets on the spray ring give a full, fine mist. Made of chrome plated steel with plastic hand grip. Shut-off. Brass and plated steel.

Treats 12,000 square feet . Treats 26,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use.
*This item is drop-ship only.

Automatic chemical application. Drastically reduces labor costs. Low volume spraying. Treats up to 3,000 sq ft. Treats 5,000 sq ft with additional fans. 120 Volts 60 HZ.

*This item is drop-ship only.

The Dramm AME Horizontal Air Flow (HAF) Fans offer efficiency, flexibility, and simplicity. Utilizing an aerodynamic design and a high-efficiency motor, the AME fan is equipped to maximize the air flow potential of any situation. When combined with speed controllers, the AME Fans offer unmatched flexibility in air flow as plants grow and mature. Because of their shrouded, aerodynamic design and high-efficiency motor, Air Movement Efficiency (AME) fans cover greater distances with better, more even air speeds. The AME Fan design provides leverage for air movement. The result is not only increased forward propulsion but a pull from behind the fan as well. This helps to even air speeds by creating momentum throughout the house. The result is fewer fans needed and an increase in efficacy and reduction in electrical costs.

Make your own hose lengths easily and quickly with our Custom Hose Starter Kit. Dramm ColorStorm Professional Hose has become the durable and flexible choice of growers around the world. This kit makes it easy to get started cutting your own length of hose. The kit includes the Dramm Press, our easy to use hose crimper, with one set of jaws, two spools of 330' ColorStorm Hose and 12 male and 12 female fittings with ferrules - enough to make 12 hoses. It is available in either 5/8" or 3/4" kits.
Drop Ship plus freight.
5/8" Custom Hose Kit:
*5/8" Hose
*2 - 330' Spools 5/8" ColorStorm hose
*1 - DP Frame - Free of Charge
*1 - DP-J625 5/8" Jaws
*12 - 5/8" Male Fittings/Ferrules
*12 - 5/8" Female Fittings/Ferrules

The Dramm AME Horizontal Air Flow (HAF) Fans offer efficiency, flexibility, and simplicity. Utilizing an aerodynamic design and a high-efficiency motor, the AME fan is equipped to maximize the air flow potential of any situation. When combined with speed controllers, the AME Fans offer unmatched flexibility in air flow as plants grow and mature. Because of their shrouded, aerodynamic design and high-efficiency motor, Air Movement Efficiency (AME) fans cover greater distances with better, more even air speeds. The AME Fan design provides leverage for air movement. The result is not only increased forward propulsion but a pull from behind the fan as well. This helps to even air speeds by creating momentum throughout the house. The result is fewer fans needed and an increase in efficacy and reduction in electrical costs.

Dramm's Agitation/Aeration Bucket provides a thorough mixing of any solution. Perfect for use with an injector, the Agitation/Aeration Bucket can keep water soluble fertilizers, fungicides, insecticides and PGRs in suspension. With a flip of a switch, agitation turns to aeration. Air is introduced into the passing stream, keeping dissolved oxygen at saturation levels. Use this feature when agitating nematodes or other organisms requiring oxygen. 5 gallon capacity.