Grower SuppliesEquipment
Greenhouse & Nursery Equipment
Delay Option Filtering
Filter Products
*Easily and effectively handles liquid disinfectants, fertilizers, herbicides, pesticides and formulations for tree, shrub and plant protection.*High-performance piston pump for increased pressure capabilities of up to 90 psi. *Extra-large tank openings for easier filling and cleaning.*28" unbreakable wand and shut-off valve for excellent reach.*Commercial shut-off valve with lock-on/lock-off feature to minimize user fatigue. *Viton seals in key locations ensure long service and durability. *Interchangeable pump handle for left or right-hand operation. *48" nylon-reinforced high-pressure hose for extended reach. *Double filtration system: filter basket and nozzle filter. *Four-nozzle assortment: adjustable, fan spray, hollow cone, and jet stream nozzles. TeeJet compatible.
Defender: Organic vapor, acid gas (chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, chlorine dioxide), ammonia, methylamine, formaldehyde and P100 cartridge/filter combination (Pair)
A replacement probe for all Bluelab Meters and Monitors.
A replacement pH probe (electrode) suitable for use with Bluelab products that test the pH of a solution. Unfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life. Includes a 6 month warranty.
A replacement pH probe (electrode) suitable for use with Bluelab products that test the pH of a solution. Unfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life. Includes a 6 month warranty.
For rapid light measurements
*Three measurement ranges
*Light sensor attached to 1.5 meter coaxial cable
*Rugged, waterproof case
*Low-battery indicator
Hanna's light measuring sensor is a photo diode that converts incident light into an electronic signal that is read and displayed on the metter's LCD as Klx, which is 1,000 lx. Multiply that reading by 92.9 to get the measurement in foot candles.
*Three measurement ranges
*Light sensor attached to 1.5 meter coaxial cable
*Rugged, waterproof case
*Low-battery indicator
Hanna's light measuring sensor is a photo diode that converts incident light into an electronic signal that is read and displayed on the metter's LCD as Klx, which is 1,000 lx. Multiply that reading by 92.9 to get the measurement in foot candles.
Waterproof EC/TDS/Temperature Tester - 12880 Solution
Hanna Instruments continues the tradition of innovation with the DiSTr6. For this series, we have included all the features you have asked for such as a replaceable graphite electrode, adjustable TDS ratio, temperature in Cø or Fø, automatic temperature compensation with adjustable á, battery level indicator, stability indicator, automatic , and automatic calibration using 12.88 mS/cm solution all in a floating, waterproof casing. These 3-in-1 testers are unmatched in EC/TDS/Temperature measurement! Use solution: 74-2536.
Range :
EC 0.00 - 20.00 mS/cm TDS 0.00 - 10.00 ppt
Temp 0.0 - 60.0øC or 32.0 - 140.0øF
Hanna Instruments continues the tradition of innovation with the DiSTr6. For this series, we have included all the features you have asked for such as a replaceable graphite electrode, adjustable TDS ratio, temperature in Cø or Fø, automatic temperature compensation with adjustable á, battery level indicator, stability indicator, automatic , and automatic calibration using 12.88 mS/cm solution all in a floating, waterproof casing. These 3-in-1 testers are unmatched in EC/TDS/Temperature measurement! Use solution: 74-2536.
Range :
EC 0.00 - 20.00 mS/cm TDS 0.00 - 10.00 ppt
Temp 0.0 - 60.0øC or 32.0 - 140.0øF
Waterproof pH/EC/TDS/Temperature Tester - 12880 Solution
The HI98130 Combo waterproof tester offers high accuracy pH, EC/TDS and temperature measurements all in a single tester! pH and EC/TDS readings are automatically compensated for the effects of temperature (ATC). These technologically advanced testers have a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode that resists contamination by salts and other substances. Use solutions: 74-2535, 74-2540, 74-2536, 74-2525, 74-2530.
Range:
pH 0.00 to 14.00 pH EC 0.00 to 20.00 mS/cm
TDS 0.00 to 10.00 ppt Temp 0.0 - 60.0øC or 32.0 - 140.0øF
The HI98130 Combo waterproof tester offers high accuracy pH, EC/TDS and temperature measurements all in a single tester! pH and EC/TDS readings are automatically compensated for the effects of temperature (ATC). These technologically advanced testers have a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode that resists contamination by salts and other substances. Use solutions: 74-2535, 74-2540, 74-2536, 74-2525, 74-2530.
Range:
pH 0.00 to 14.00 pH EC 0.00 to 20.00 mS/cm
TDS 0.00 to 10.00 ppt Temp 0.0 - 60.0øC or 32.0 - 140.0øF
This parameter is important in determination of the corrosive properties of water, caused by carbonates, bicarbonates as well as dissolved salts. Testing alkalinity is important in the treatment of soil and environmental testing as well as in agriculture. Range: 0-100 mg/L; 0-300 mg/L Smallest Increment: 1 mg/L; 3mg/L # of Test: 110
The ultimate handy solution for measuring pH and temperature!
Monitoring pH is critical for crop health. The ideal pH is crop specific and maximizes micronutrient availability. The hand held pH pen provides a compact, quick and handy way to manage the success of your crop to ensure maximum uptake of nutrients. Teamed with the Conductivity (EC/PPM) Pen, you have a convenient and accurate system for ensuring optimum plant growth and health. Includes a 1 year warranty.
Monitoring pH is critical for crop health. The ideal pH is crop specific and maximizes micronutrient availability. The hand held pH pen provides a compact, quick and handy way to manage the success of your crop to ensure maximum uptake of nutrients. Teamed with the Conductivity (EC/PPM) Pen, you have a convenient and accurate system for ensuring optimum plant growth and health. Includes a 1 year warranty.
The ultimate handy solution for measuring conductivity (EC/PPM) and temperature! The Bluelab EC Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed. This pen can monitor EC/PPM of solution. The Bluelab Conductivity Pen also measures the temperature of the solution. Temperature affects the growth rate so a solution temperature of 65-72øF is recommended for most crops. Includes a 1 year warranty.
Truncheon Nutrient Meters
Battery operated Truncheon meters measure conductivity in EC, CF and ppm (500 and 700 scales). Durable, analog systems require no calibration. Truncheon measures EC in the range of 0.2-3.6 mmos/cm. Commercial Truncheon extends the EC range from 0.4-6.0 mmos/cm. Both models are fully waterproof, have auto on/off functions and are virtually indestructible.
Battery operated Truncheon meters measure conductivity in EC, CF and ppm (500 and 700 scales). Durable, analog systems require no calibration. Truncheon measures EC in the range of 0.2-3.6 mmos/cm. Commercial Truncheon extends the EC range from 0.4-6.0 mmos/cm. Both models are fully waterproof, have auto on/off functions and are virtually indestructible.
It's all you need for simple and reliable crop management.
A portable pH, conductivity and temperature meter all in one. It has two probes, a Bluelab pH Probe and a Bluelab Conductivity (EC/PPM)/ Temperature Probe. When taking a reading, simply place them into the solution and the selected reading is displayed on screen. Calibration of the pH probe is simple as instructions are supplied on the back of the meter and the easy push button method makes this one of the simplest meters to use The pH probe is replaceable so you can use this meter for years to come.
Includes 5 year warranty on the meter, 6 month on the probe.
A portable pH, conductivity and temperature meter all in one. It has two probes, a Bluelab pH Probe and a Bluelab Conductivity (EC/PPM)/ Temperature Probe. When taking a reading, simply place them into the solution and the selected reading is displayed on screen. Calibration of the pH probe is simple as instructions are supplied on the back of the meter and the easy push button method makes this one of the simplest meters to use The pH probe is replaceable so you can use this meter for years to come.
Includes 5 year warranty on the meter, 6 month on the probe.
pH and conductivity / temperature probes need maintenance at least monthly to maintain accuracy and reading response speed. A clean probe is an accurate probe. Accurate readings simplify crop management and provide improved growth.
pH and conductivity / temperature probes need maintenance at least monthly to maintain accuracy and reading response speed. A clean probe is an accurate probe. Accurate readings simplify crop management and provide improved growth.
pH and conductivity / temperature probes need maintenance at least monthly to maintain accuracy and reading response speed. A clean probe is an accurate probe. Accurate readings simplify crop management and provide improved growth.
Replacement power supply with four interchangeable plug adaptors.
pH instruments must be cleaned and calibrated at least monthly to provide you with the most accurate reading.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
pH instruments must be cleaned and calibrated at least monthly to provide you with the most accurate reading.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
Is your conductivity instrument adequately cleaned and giving accurate results? Test and see...
The 2.77 EC solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/CF probe.
The 2.77 EC solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/CF probe.
pH instruments must be cleaned and calibrated at least monthly to provide you with the most accurate reading.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
pH instruments must be cleaned and calibrated at least monthly to provide you with the most accurate reading.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
pH measuring equipment is calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Essential for use with all Bluelab pH products for the calibration of Bluelab pH Probes.
Is your conductivity instrument adequately cleaned and giving accurate results? Test and see...The 2.77 EC solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/CF probe.
High accuracy Thermometer with remote probe
*3 ft probe cable
*Calibration Check Feature (Cal-Check)
*Long Battery Life
This highly accurate thermometer is equipped with Hanna's unique calibration device (Cal-Check), which allows users to check if the calibration is accurate. This pocket sized thermometer incorporates a remote probe with a 3 foot cable and has an accuracy of 0.5 F. Temp. Range: -58.0 to 302.0 F
*3 ft probe cable
*Calibration Check Feature (Cal-Check)
*Long Battery Life
This highly accurate thermometer is equipped with Hanna's unique calibration device (Cal-Check), which allows users to check if the calibration is accurate. This pocket sized thermometer incorporates a remote probe with a 3 foot cable and has an accuracy of 0.5 F. Temp. Range: -58.0 to 302.0 F
Temperature Meter with pH Electrode Diagnostic
*4 Meters in 1
*Fast response probe
*Slimline design
The 9813-6 has all popular features of the 9813, plus Cø and the New Cal-Check Calibration feature! Now you can verify a clean, calibrated electrode anywhere in seconds. Accuracy is ensured with Automatic Temperature Compensation (ATC) and an advanced sensor which completely eliminates polarization and oxidation problems. HANNA also developed F.S.T. technology for HI9813-6, with this special security system, a system failure will force a fixed value close to pH 4, rather than pH 7, and render the problem clearer to the user. Cal solutions: 74-2520, 74-2525, 74-2530, 74-2535, 74-2540.
Range:
pH 0.0 to 14.0
EC (mS/cm-mmho/cm) 0.00 to 4.00
TDS 0 to 1999 ppm (mg/L)
*4 Meters in 1
*Fast response probe
*Slimline design
The 9813-6 has all popular features of the 9813, plus Cø and the New Cal-Check Calibration feature! Now you can verify a clean, calibrated electrode anywhere in seconds. Accuracy is ensured with Automatic Temperature Compensation (ATC) and an advanced sensor which completely eliminates polarization and oxidation problems. HANNA also developed F.S.T. technology for HI9813-6, with this special security system, a system failure will force a fixed value close to pH 4, rather than pH 7, and render the problem clearer to the user. Cal solutions: 74-2520, 74-2525, 74-2530, 74-2535, 74-2540.
Range:
pH 0.0 to 14.0
EC (mS/cm-mmho/cm) 0.00 to 4.00
TDS 0 to 1999 ppm (mg/L)
Treats 12,000 square feet . Treats 26,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use.
*This item is drop-ship only.
*This item is drop-ship only.
The TULV110 offers an adjustable output from 5-11 liters/hour and an adjustable particle size range of 10-100 æ. Depending on the output and particle size, the TULV110 can propel the fog up to 75 feet.
The importance of buffer and maintenance solutions could not be understated. These solutions should be used to initially calibrate all Hanna hand held meters and keep them working accurately for years.
The importance of buffer and maintenance solutions could not be understated. These solutions should be used to initially calibrate all Hanna hand held meters and keep them working accurately for years.
The importance of buffer and maintenance solutions could not be understated. These solutions should be used to initially calibrate all Hanna hand held meters and keep them working accurately for years.
The importance of buffer and maintenance solutions could not be understated. These solutions should be used to initially calibrate all Hanna hand held meters and keep them working accurately for years.
The importance of buffer and maintenance solutions could not be understated. These solutions should be used to initially calibrate all Hanna hand held meters and keep them working accurately for years.
The importance of buffer and maintenance solutions could not be understated. These solutions should be used to initially calibrate all Hanna hand held meters and keep them working accurately for years.
The importance of buffer and maintenance solutions could not be understated. These solutions should be used to initially calibrate all Hanna hand held meters and keep them working accurately for years.
Use of the PulsFOG requires a carrier solution to help reduce surface tension and create evenly sized droplets. There are three solutions available. For most horticultural applications, NutriFOG is the preferred carrier. VK-I and VK-II are also available. NutriFog and VK-II are for all chemical formulations and mixed with water. VK-I is for EC chemicals only and is NOT to be mixed with water.
Stay connected - monitor, data log, and remotely view pH, conductivity and temperature readings.
This is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. You can access the data via the cloud from a remote mobile device or computer to check for any variances. Just one Connect Stick is required to receive wireless data from one or more Guardian Monitor connects. For remote or cloud access, the computer you are already data logging to will need permanent internet access. Includes 2 year warranty on the monitor, 6 month on the probe.
This is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. You can access the data via the cloud from a remote mobile device or computer to check for any variances. Just one Connect Stick is required to receive wireless data from one or more Guardian Monitor connects. For remote or cloud access, the computer you are already data logging to will need permanent internet access. Includes 2 year warranty on the monitor, 6 month on the probe.
*Polycarbonate lens with 200ø field of vision that meets ANSI requirements for high impact
*Silicone nose cup offers a soft, comfortable fit ideal for all day use
*Deeper threaded cartridge connector virtually eliminates accidental disconnections and worker exposure to contaminants
*Wide viewing area for distortion-free visibility and optical clarity
*Silicone nose cup offers a soft, comfortable fit ideal for all day use
*Deeper threaded cartridge connector virtually eliminates accidental disconnections and worker exposure to contaminants
*Wide viewing area for distortion-free visibility and optical clarity
*OV/R95 paint spray & pesticide respirator with organic vapor cartridges & R95 pre-filters
*Soft & comfortable, non-allergenic elastomeric blend facepiece provides excellent fit
*Contoured sealing flange eliminates pressure point on face - fits wide range of facial types
*Provides protection against most paints and pesticides
*Soft & comfortable, non-allergenic elastomeric blend facepiece provides excellent fit
*Contoured sealing flange eliminates pressure point on face - fits wide range of facial types
*Provides protection against most paints and pesticides
*This item is drop-ship only.
Kasco ZA2P3 Filter for Protective Helmet #K80S-T8N 2 required
ZA1P3 Kasco Filter for Professional 88 Protective Helmet
Professional 88 Protective Helmets
Designed for use in greenhouses, orchard, and nurseries. A self-contained unit with batteries; twin fan unit and two filters built into the helmet. Nothing is worn around the waist. Batteries will last 4 hours and take 4 hours to fully recharge. Helmet and filters weigh 4.5 lbs. The helmet is made of tough fiberglass with a Lexan shatter and crack resistant visor. All components are the finest available.
All helmets are triple inspected at the factory and sealed and are covered by a 12 month limited warranty. Kasco has the right system to protect you against pesticides, dust or any other hazardous chemicals that you might encounter. Kasco helmets can also be utilized to increase worker contentment in atmospheres that are particularly odorous or irritating.
**WARNING:
Do not use KASCO helmets with fumigants.
Do not use them in manure pits or silos or any atmosphere where oxygen may be less than 19.5%.
*This item is drop-ship only.
Designed for use in greenhouses, orchard, and nurseries. A self-contained unit with batteries; twin fan unit and two filters built into the helmet. Nothing is worn around the waist. Batteries will last 4 hours and take 4 hours to fully recharge. Helmet and filters weigh 4.5 lbs. The helmet is made of tough fiberglass with a Lexan shatter and crack resistant visor. All components are the finest available.
All helmets are triple inspected at the factory and sealed and are covered by a 12 month limited warranty. Kasco has the right system to protect you against pesticides, dust or any other hazardous chemicals that you might encounter. Kasco helmets can also be utilized to increase worker contentment in atmospheres that are particularly odorous or irritating.
**WARNING:
Do not use KASCO helmets with fumigants.
Do not use them in manure pits or silos or any atmosphere where oxygen may be less than 19.5%.
*This item is drop-ship only.
K80S-T8N(G) Helmet
For use when spraying pesticides in greenhouses. A 6 -volt battery worn at the waist supplies power. Comes complete with transformer - charger. Battery life is 4 hours. Time to recharge the battery is 4 hours. A second battery can be on charge while the first one is at work. Fitted with two ZA2/P3 pesticide filters.
*WARNING:
Do not use KASCO helmets with fumigants.
Do not use them in manure pits or silos or any atmosphere where oxygen may be less than 19.5%.
*This item is drop-ship only.
For use when spraying pesticides in greenhouses. A 6 -volt battery worn at the waist supplies power. Comes complete with transformer - charger. Battery life is 4 hours. Time to recharge the battery is 4 hours. A second battery can be on charge while the first one is at work. Fitted with two ZA2/P3 pesticide filters.
*WARNING:
Do not use KASCO helmets with fumigants.
Do not use them in manure pits or silos or any atmosphere where oxygen may be less than 19.5%.
*This item is drop-ship only.
The HI99121 kit has been designed to address the question of correct and rapid measurement of pH directly in soil. Every item has been made to facilitate measurements in the field without compromising accuracy. You can test the pH of soil directly or after preparation of a diluted sample. In order to measure the pH directly,the kit includes a plastic auger to perforate the ground. The dual-level LCD shows the pH value from -2 to 16 with 0.01 resolution. It simultaneously displays the temperature on the secondary level. With a menu-driven custom microprocessor, the user is helped with clear prompts during operation and calibration. Calibration solutions: 74-2525 and 74-2530
Waterproof pH/Temperature Tester
The pHep 4 includes features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, stability indicator, automatic shut-off and automatic calibration using pH4 + pH7 solution all in a floating, waterproof casing. Calibration solutions: 74-2525, 74-2530, 74-3235, 74-2540.
Range:
pH 0.0 - 14.0 Temp 0.0 - 60.0øC or 32.0 - 140.0øF
The pHep 4 includes features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, stability indicator, automatic shut-off and automatic calibration using pH4 + pH7 solution all in a floating, waterproof casing. Calibration solutions: 74-2525, 74-2530, 74-3235, 74-2540.
Range:
pH 0.0 - 14.0 Temp 0.0 - 60.0øC or 32.0 - 140.0øF
This multiparameter instrument measures the most important factors in the growing industry. The HI 9813 is powered by readily available 9V batteries and calibration is quick and easy. The EC range has been extended and in the tDS range, the advanced HI 9813 uses the 4-4-2 conversion factor for growing applications. Measure pH/EC/TDS all-in-one instrument, and with a single probe. Range pH 0.0 to 14.0 EC (mS/cm-mmho/cm) 0.00 to 4.00 TDS 0 to 1999 ppm (mg/L)