Drip Irrigation Supplies
Delay Option Filtering
Filter Products
Delivers precise amounts of water to individual pots. The Woodpecker dripper is the more economical non-pressure compensated dripper for shorter, level runs. .5 GPH flow rate, 20 psi regulator required for proper operation. Choose the red plastic weight or angle barb to complete the installation.
3/4" Female hose thread swivel x 16mm compression x 16 mm compression tee
.060 i.d. x 30" drip tubes. 100/package.
Used in upright (3'-5' over crop) Netafim irrigation systems. Flow rate of 19 GPH per nozzle. Irrigation strip of 14'-16'. 35 PSI pressure regulator and 120 mesh filter required. A #5017066 adapter required for use with hanging assemblies.
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 20 PSI should be used with non-pressure compensated drippers. Med flow 3.5-17 GPM
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 20 PSI should be used with non-pressure compensating drippers- Low flow .25- 4.4 GPM
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
A quick and easy means for closing off the end of your 1" irrigation line. Can be quickly re-opened for draining.
Used as stand allow dripper or part of 4-way dripper assemblies. All the features of the Woodpecker pressure compensating dripper with the added benefit of a "no-leak" device which turns the flow off when the line pressure drops. All the drippers come on and turn off at the same time, leaving the main water line full and ensuring extremely accurate watering from pot to pot. 35 psi Regulator Required For Proper Operation
Maintains a constant 15 PSI for low pressure installations- Low flow- .25- 4.4 GPM
Delivers precise amounts of water to individual pots. The WPCJ pressure compensated no-leak dripper is ideal for longer runs, when irrigating on slope, or when absolute precision of water volume to each pot is required. The WPCJ's "no-leak" feature stops dripping when the pressure on the main water line drops. All of the drippers on the line start and stop at the same time, leaving the line full of water for the next irrigation. .5 GPH flow rate, a 20 PSI pressure regulator is required for proper operation. Choose either the red plastic weight or angle barbed stake to complete the installation. Perfect for hanging basekets, nursery crops or potted plants
Delivers precise amounts of water to individual pots. The Woodpecker dripper is the more economical non-pressure compensated dripper for shorter, level runs. .5 GPH flow rate, a 20 PSI pressure regulator is required for proper operation. Choose either the red plastic weight or angled barb stake to complete the installation.
Streamline Plus Thinwall Dripline is the perfect choice for row crop growers planting short to medium sized runs. Available with variable dripper spacings, allowing growers to customize systems based on their application rates and wetting patterns and numerous wall thicknesses that can weather various environmental conditions. For surface or subsurface installations in practically any soil type.
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industry's longest, requiring fewer fittings and less time changing reels during installation
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industry's longest, requiring fewer fittings and less time changing reels during installation
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 20 PSI should be used with non-pressure compensated drippers. Flow range 7-35 GPM
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 65 PSI should be used where a regulated, higher pressure is required. Flow range 3.5-17 GPM
Start screw nut connector for PE, fast body w/o ring #32500-018510
An economical way to accurately water 8 pots using one emitter. The Arrow Dripper stake has a secondary emitter that allows uniform flow rates even at varying tube lengths. Comes preassembled in 24"/36" tube lengths (4 of each tube length). 2 GPH from each emitter- 0.25 GPH per arrow dripper stake (1 in each pot) Recommended uses: Potted greenhouse crops, Poinsettias, geraniums, Nursery stock (up to 1 gallon), Mums (up to 8" x 5"). A 20 psi regulator required for proper operation.
rubber grommet for 3/8" threaded base